Traduction de «Transformers for oil- gas-burner ignition equipment » (Anglais → Français) :

Transformers for oil- or gas-burner ignition equipment

ignition transformer for gas burners

1. Ash handling and fuel handling equipment, blowers, circulating pumps, fuel tanks, furnaces, stokers, oil or gas burners, hot water and steam radiators, thermostats, regulators, all the foregoing when designed for use in permanently installed heating systems for buildings.

(9) All equipment at or near a well, a process vessel, an oil storage tank or other source of ignitable vapour shall be constructed in accordance with Part I of the Canadian Electrical Code Part I and the Oil and Gas Occupational Health and Safety Regulations.

(8) All equipment at or near a well, a process vessel, an oil storage tank or other source of ignitable vapour shall be constructed in accordance with Part I of the Canadian Electrical Code Part I and the Oil and Gas Occupational Health and Safety Regulations.

Question No. 419 Ms. Kirsty Duncan: With respect to the risk of corrosion and spills and other safety concerns arising from the transport of bitumen in pipelines, and to government action to address these risks: (a) how does diluted bitumen compare with West Texas Intermediate (WTI) in terms of (i) abrasive material content, (ii) acid concentration, (iii) sulphur content, (iv) viscosity; (b) to what extent is diluted bitumen more likely than WTI to cause corrosion or erosion in the pipelines through which they respectively flow; (c) what is the composition of diluted bitumen in Canada; (d) what are all of the vola ...[+++]tile chemicals, persistent organic pollutants or carcinogenic substances present in diluted bitumen in Canada; (e) in the process of diluting bitumen in Canada, what are the (i) natural gas condensates used, (ii) other petroleum products used; (f) what is the process by which diluted bitumen corrodes pipelines, with specific reference to (i) abrasion, (ii) friction, (iii) high pressure, (iv) settling of sediment, (v) velocity, (vi) sulphur-reducing bacteria, (vii) other significant factors; (g) for all proposed or existing National Energy Board (NEB)-regulated pipelines, what is (i) the amount of hard sediment passing through the pipeline annually, (ii) the average pressure, (iii) the average temperature; (h) what, if any, (i) research, (ii) action, (iii) investment has the government undertaken to determine whether diluted bitumen can flow safely through pipelines; (i) what, if any, (i) research, (ii) action, (iii) investment has the government undertaken to determine whether or not conventional crude should be distinguished from diluted bitumen when setting minimum standards for pipelines; (j) what, if any, (i) research, (ii) action, (iii) investment has the government undertaken to design safety and spill responses and spill liability management capabilities that are appropriate specifically to diluted bitumen; (k) how does a diluted bitumen sp ...