Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Adjust filament tension
Adjusting filament tension
Beginning of the regeneration cutting
Burning machine
Continuous filament glass yarn
Continuous filament yarn
Continuous-filament yarn
Cut filament
Cut-off machine
Cutting face
Cutting filament
Cutting torch
Directly heated cathode
Directly heated cathode filament
Filament
Filament cutting
Filament fibre
Filament tension adjusting
Filament yarn
Filament-type cathode
Filamentary cathode
Fine filament
First cutting
First felling
Flame-cutting machine
Glass continuous filament yarn
Glass filament yarn
Initiation of cutting
Optimise filament tension
Preparatory cutting
Preparatory felling
Removing filament mandrel pins
Saw off filament mandrel pins
Sawing filament mandrel pins off
Sawing off filament mandrel pins
Sever filament
Slab cutting machine
Textile glass continuous filament yarn
Textile glass filament yarn
Torch cutting machine

Traduction de «cut filament » (Anglais → Français) :

TERMINOLOGIE
voir aussi les traductions en contexte ci-dessous
filament cutting | sever filament | cut filament | cutting filament

couper des filaments




textile glass continuous filament yarn [ textile glass filament yarn | glass continuous filament yarn | continuous filament glass yarn | glass filament yarn ]

fil de silionne


filament tension adjusting | optimise filament tension | adjust filament tension | adjusting filament tension

ajuster la tension de filaments


removing filament mandrel pins | sawing filament mandrel pins off | saw off filament mandrel pins | sawing off filament mandrel pins

couper les broches fixant une pièce en filament sur un mandrin


filament | filament fibre | fine filament

fibre filament | filament


directly heated cathode | directly heated cathode filament | filament | filamentary cathode | filament-type cathode

cathode à chauffage direct | filament


filament yarn [ continuous filament yarn | continuous-filament yarn ]

fil continu


burning machine | cut-off machine | cutting torch | flame-cutting machine | slab cutting machine | torch cutting machine

machine à découper au chalumeau | machine d'oxycoupage


preparatory cutting | preparatory felling | first felling | first cutting | beginning of the regeneration cutting | initiation of cutting | cutting face

première coupe de régénération
TRADUCTIONS EN CONTEXTE
Chapter 61 | Articles of apparel and clothing accessories, knitted or crocheted | Spinning of natural and/or man-made staple fibres, or extrusion of man-made filament yarn, accompanied by knitting (knitted to shape products) [5] or Knitting and making up including cutting (assembling, two or more pieces of knitted or crocheted fabric which have been either cut to form or obtained directly to form) [5] [6] | |

Chapitre 61 | Vêtements et accessoires du vêtement, en bonneterie | Filature de fibres discontinues naturelles ou synthétiques, ou extrusion de fils de filaments synthétiques, accompagnée de tricotage (produits tricotés en forme) [5] ou Tricotage et confection, y compris coupe (assemblage par couture ou autrement de deux ou plusieurs pièces de bonneterie qui ont été découpées en forme ou obtenues directement en forme) [5] [6] | |


Using a mass production filament lamp which has been aged for at least one hour the headlamp shall be operated on passing beam without being dismounted from or readjusted in relation to its test fixture (For the purpose of this test, the voltage shall be adjusted as specified in paragraph 1.1.1.2). The position of the cut-off line in its horizontal part (between the vertical lines passing through point 50 L and 50 R) shall be verified 3 minutes (r3) and 60 minutes (r60) respectively after operation.

Une lampe à incandescence de série vieillie pendant au moins une heure est allumée en position feu-croisement sans être démontée de son support ni réajustée par rapport à celui-ci (Aux fins de cet essai, la tension doit être réglée comme il est prescrit au paragraphe 1.1.1.2.) La position de la ligne de coupure dans sa partie horizontale (entre les verticales passant par les points 50 L et 50 R) est vérifiée trois minutes (r3) et 60 minutes (r60), respectivement, après l'allumage.


An electrically powered walk-behind or hand-held grass cutting machine with cutting element(s) of non-metallic filament line(s) or freely pivoting non-metallic cutters with a kinetic energy of not more than 10 J each, intended to cut grass or similar soft vegetation.

Machine à couper le gazon munie d'un moteur électrique, à conducteur à pied ou utilisée à la main, dont le dispositif de coupe est constitué d'un ou plusieurs fils non métalliques ou de lames non métalliques à pivotement libre, d'une énergie cinétique inférieure ou égale à 10 J chacun, destinée à couper de l'herbe et des végétaux similaires à faible résistance. Le ou les éléments de coupe fonctionnent dans un plan approximativement parallèle (dans le cas du coupe-gazon) ou perpendiculaire (dans le cas du coupe-bordure).


Using a series-production filament lamp which has been aged for at least one hour the headlamp is operated on passing beam without being removed from or readjusted in relation to its test fixture (For the purpose of this test, the voltage must be adjusted as specified in 1.1.1.2.) The position of the cut-off line in its horizontal part (between VV and the vertical line passing through point B 50 R for left-hand traffic or B 50 L for right-hand traffic) must be verified 3 minutes (r3) and 60 minutes (r60) after operation.

Un projecteur équipé d'une lampe à incandescence de série, vieillie pendant au moins une heure, est allumé en position faisceau-croisement sans être démonté de son support ni réajusté par rapport à celui-ci (Aux fins de cet essai, la tension doit être réglée comme prescrit au point 1.1.1.2). La position de la partie horizontale de la ligne de coupure (entre vv et la verticale passant par le point B 50 L pour la circulation à droite ou B 50 R pour la circulation à gauche) est vérifiée trois minutes (r3) et 60 minutes (r60), après l'allumage.


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
The "cut-off" shall be a horizontal straight line on the side opposite to the direction of the traffic for which the headlamp is intended ; on the other side it should be horizontal or within an angle of 15 % above the horizontal (1)It is considered that an arrangement satisfies the requirements of this section when the filament lamp can be easily fitted into the headlamp and the positioning lug can be correctly fitted into its slot even in darkness, the slot being of exactly the right size.

Du côté opposé au sens de la circulation pour lequel le feu est prévu, la coupure doit être horizontale ou située dans un angle de 15º au-dessus de cette horizontale (1)On estime qu'un dispositif satisfait aux prescriptions de ce point lorsque la mise en place de la lampe sur le feu peut se faire avec facilité et que l'engagement du repère d'orientation dans son encoche peut être réalisé même dans l'obscurité sans erreur d'orientation, la largeur de cette encoche étant parfaitement adéquate.


w