Traduction de «Rupture par jet d'eau » (Français → Anglais) :

33 (1) Every Class A ship shall be provided with water pipes and hydrants; the diameter of the water pipes shall be sufficient to enable an adequate supply of water to be provided for the simultaneous operation of at least two fire hoses and for the projection thereby of two powerful jets of water; the number and position of the hydrants shall be such that at least two such jets may be directed into any part of the ship by means of two fire hoses each not over ...[+++]18 m in length, each jet being supplied from a separate hydrant; at least one fire hose shall be provided for each hydrant.

(4) Subject to subsection (5), in every Class H ship over 45.7 m in length that is a tanker a minimum of two combination solid stream and water fog nozzles shall be carried on deck exclusive of those required for the machinery spaces and the nozzles shall be capable of producing a solid stream or a high velocity fog and of being shut off, and, in addition, two applicators equipped with a low velocity water fog tip capable of being attached directly to the nozzle or the nose shall be provided and the fog nozzles and applicators referred to herein shall be located in such parts of the tanker as are most convenient and of most use in the ca ...[+++]se of an emergency.

(a) fire hoses shall be rigged and fire pumps operated to produce the required jets of water, and where an emergency pump is provided and the generator that supplies the power is situated above the bulkhead deck, the generator shall be started up and the pump shall be operated to produce the jets of water without anyone having to enter the machinery space;

Machine tools for working any material by removal of material, by laser or other light or photon beam, ultrasonic, electrodischarge, electrochemical, electron beam, ionic-beam or plasma arc processes; water-jet cutting machines

Question No. 140 Ms. Kirsty Duncan: With respect to development of the oil sands, its impacts on the environment and surrounding communities, and the economic effects of these impacts: (a) what, if any, steps has the government taken to establish air emission limits or air quality standards to achieve the World Health Organization’s Air Quality Guidelines to protect air quality and human health; (b) what, if any, steps has the government’s sector-by-sector approach taken to regulate carbon emissions in the oil sands to ensure the oil sands industry makes appropriate reductions in its greenhouse gas (GHG) emissions to contribute to Canada’s GHG emission reduction goal of 17% below the 2005 level; (c) what, if any, studies has the governmen ...[+++]t undertaken to examine the effect of the oil sands expansion on (i) GHG emissions, (ii) Canada’s ability to meet its GHG emission reduction goals, (iii) Canada’s contribution to the goal of staying below a 2°C increase in global average surface temperature, relative to the pre-industrial level, as articulated at the G8 meeting in L’Aquila, Italy and at the United Nations Framework Convention on Climate Change negotiations through the Copenhagen Accord in December 2009 and the Cancun Agreements in December 2010, (iv) the full suite of sustainability criteria, including environmental, economic and social sustainability, and (v) what were the results of any studies identified in (c)(i), (c)(ii), (c)(iii), and (c)(iv); (d) what, if any, studies has the government undertaken to examine (i) the scope of oil sands expansion if the oil sands sector is not required to deliver its proportional share of GHG reductions, (ii) the impacts such a decision would have on other sectors’ allowable GHG emissions, (iii) whether other sectors of the Canadian economy would have to do more than their proportional share to reduce emissions, (iv) what were the results of any studies identified in (d)(i), (d)(ii), and (d)(iii); (e) what, if any, studies ...

Portions of a stream with accelerated current where it descends rapidly but without a break in the slope of the bed sufficient to form a waterfall.