Traduction de «mode d'essai » (Français → Anglais) :

test mode

cantilever beam test mode [ Izod type test mode ]

test mode

test standby mode

open trial | open-label trial | unblinded trial | nonblinded trial | non-blinded trial | open study | open-label study | unblinded study | nonblinded study | non-blinded study

Definition: The essential feature is recurrent obsessional thoughts or compulsive acts. Obsessional thoughts are ideas, images, or impulses that enter the patient's mind again and again in a stereotyped form. They are almost invariably distressing and the patient often tries, unsuccessfully, to resist them. They are, however, recognized as his or her own thoughts, even though they are involuntary and often repugnant. Compulsive acts or rituals are stereotyped behaviours that are repeated again and again. They are not inherently enjoyable, nor do they result in the completion of inherently useful tasks. Their function is to prevent some objectively unlikely event, often involving harm to or caused by the patient, which he or she fears might ...[+++]otherwise occur. Usually, this behaviour is recognized by the patient as pointless or ineffectual and repeated attempts are made to resist. Anxiety is almost invariably present. If compulsive acts are resisted the anxiety gets worse. | anankastic neurosis obsessive-compulsive neurosis

test procedure

‘steady-state test cycle’ means a test cycle in which engine speed and torque are held at a finite set of nominally constant values; steady-state tests are either discrete mode tests or ramped-modal tests.

5. An engine that is representative of the engine type or, where applicable, of the parent engine of the engine family, or an engine selected in accordance with the second subparagraph of paragraph 3, shall be tested on a dynamometer using the applicable non-road steady-state test cycle identified in Tables IV-1 to IV-10 of Annex IV. The manufacturer may choose whether to conduct that test using the discrete-mode or the ramped-modal test method.

In the case of Type 1B, Type 2B and Type 3B dual-fuel engines, an additional PEMS test shall be performed in diesel mode on the same engine and vehicle immediately after or before the PEMS demonstration test performed in dual-fuel mode.

If tests are made using the methods described in Part 8, the immunity test reference levels shall be 48 volts/m for the 150 mm stripline testing method, 12 volts/m for the 800 mm stripline testing method, 60 volts/m for the transverse electromagnetic mode (TEM) cell testing method, 48 mA for the bulk current injection (BCI) testing method and 24 volts/m for the free field testing method.