Traduction de «Compressor air intake casing » (Anglais → Français) :

compressor air inlet casing | compressor air intake casing

air intake casing [ air intake case | air-intake casing ]

nose cowl | nose inlet cowl | air intake casing | intake casing

air intake casing

air intake case

In other cases, an equivalent system may be used and a check should be made to ascertain that the intake pressure does not differ by more than 100 Pa from the limit specified by the manufacturer for a clean air filter.

where there is a risk of an appreciable effect on the engine power; in the case of naturally aspirated spark ignition engines; when the manufacturer requests that this should be done. In other cases, an equivalent system may be used and a check should be made to ascertain that the intake pressure does not differ by more than 100 Pa from the upper limit specified by the manufacturer for a clean air filter.

The engine speed and load, intake air temperature and depression, exhaust temperature and backpressure, fuel flow and air or exhaust flow, charge air temperature, fuel temperature and humidity shall be recorded during each mode, with the speed and load requirements (see section 2.7.2) being met during the time of particulate sampling, but in any case during the last minute of each mode.

It also includes any storage reservoirs for the operating medium and the return lines, but not the vehicle's engine (except for the purposes of item 4.1.3) or its drive to the energy source; 1.3.4.1. Energy source means that part of the energy supply which provides the energy in the required form e.g. hydraulic pump, air compressor; 1.3.4.2. Energy reservoir means that part of the energy supply in which the energy provided by the energy source is stored; 1.3.4.3. Storage reservoir means that part of the energy supply in which the operating medium is stored at or near to the atmospheric pressure. 1.4. Steering parameters 1.4.1. Steerin ...[+++]g control effort means the force applied to the steering control in order to steer the vehicle; 1.4.2. Steering time means the period of time from the beginning of the movement of the steering control to the moment at which the steered wheels have reached a specific steering angle; 1.4.3. Steering angle means the angle between the projection of a longitudinal axis of the vehicle and the line of intersection of the wheelplane (being the central plane of the tyre, normal to the spin axis of the wheel) and the road surface; 1.4.4. Steering forces mean all the forces operating in the steering transmission; 1.4.5 Mean steering ratio means the ratio of the angular displacement of the steering control to the mean of the swept steering angle of the steered wheels for a full lock-to-lock turn; 1.4.6. Turning circle means the circle within which are located the projections onto the ground plane of all the points of the vehicle, excluding the external mirrors and the front direction indicators, when the vehicle is driven in a circle; 1.4.7. Nominal radius of steering control means in the case of a steering wheel the shortest dimension from its centre of rotation to the outer edge of the rim. In the case of any other form of control, it means the distance between its centre of rotation and the point at which the steering effort is applied. ...