Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Bearing diameter
Bearing hole
Bolt slug diameter
DHT hammer
DTH-drill
Diameter of split pin hole
Diameter of the hole
Diameter of the split pin hole
Down the hole hammer
Down-hole hammer
Down-the-hole drill
Down-the-hole hammer
Down-the-hole hammer drill
Downhole drill
Hole diameter
ITH drill
ITH-drill
In-hole drill
In-the-hole drill
Large diameter of hole
Large diameter of taper hole
Nominal diameter of hole
Nominal diameter of taper hole
Slug diameter
Slug diameter of the bolt
Split pin hole diameter

Traduction de «Diameter the hole » (Anglais → Français) :

TERMINOLOGIE
voir aussi les traductions en contexte ci-dessous
nominal diameter of taper hole | nominal diameter of hole

diamètre nominal de l'alésage conique | diamètre nominal de l'alésage


large diameter of taper hole | large diameter of hole

grand diamètre de l'alésage conique | grand diamètre de l'alésage






diameter of split pin hole [ split pin hole diameter ]

diamètre du trou de goupille dans la tige [ diamètre du trou de goupille ]


diameter of the split pin hole

diamètre du trou de goupille


down-the-hole drill [ down-the-hole hammer | downhole drill | down-hole hammer | down-the-hole hammer drill | in-the-hole drill | DTH-drill | ITH-drill ]

marteau fond de trou [ marteau perforateur fond-de-trou | marteau fond-de-trou | foreuse à marteau plongeur | perforatrice trou-en-bas | marteau au fond du trou ]


A rare benign autosomal dominant disorder of fat tissue proliferation with characteristic of presence of multiple small lipomas of 2 to 5 cm in diameter in the middle third of the body (i.e. the forearms, trunk, and upper thighs), and which are gener

lipomatose mésosomatique de Roch-Leri


in-the-hole drill | ITH drill | down-the-hole drill | down the hole hammer | DHT hammer | in-hole drill

marteau fond de trou | marteau fond-de-trou | foreuse ITH


slug diameter [ slug diameter of the bolt | bolt slug diameter ]

diamètre du noyau de la vis [ diamètre du noyau ]
TRADUCTIONS EN CONTEXTE
Action: Remove the firing pin, enlarge the firing pin hole at a minimum diameter of 5 mm and weld the firing pin hole.

Mécanisme: retirer le percuteur, agrandir l'orifice du percuteur à un diamètre de 5 mm minimum et souder l'orifice du percuteur.


In case of break action: Remove the firing pin, enlarge the firing pin hole at a minimum diameter of 5 mm and weld the firing pin hole.

Pour les armes à canon basculant: retirer le percuteur, agrandir l'orifice du percuteur à un diamètre de 5 mm minimum et souder l'orifice du percuteur.


Drill holes that are of a diameter larger than the calibre of the firearm and at a longitudinal interval of 3 cm (short firearms) or 5 cm (long firearms) through the casing and penetrating the expansion chamber.

Forer des trous présentant un diamètre supérieur au calibre de l'arme à feu à un intervalle longitudinal de 3 cm (armes courtes) ou de 5 cm (armes longues) à travers le logement et pénétrant la chambre de dilatation.


If holes are used in the water separator instead of bars, the maximum diameter of the holes shall not exceed 10 millimetres.

Si le séparateur d'eau est doté de trous et non de barres, le diamètre de ces trous ne doit pas dépasser 10 millimètres.


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
Holes in the chutes before the water separator shall not exceed 15 millimetres in diameter.

Le diamètre des trous des déversoirs situés avant le séparateur d'eau ne doit pas dépasser 15 millimètres.


the identification document shall be rendered invalid at least by tamper-proof stamping it ‘invalid’ on all pages or pinching a hole of appropriate diameter, not less than a standard hole puncher, through all pages;

le document d'identification est invalidé au moins par l'apposition d'un cachet infalsifiable portant la mention «non valide» sur toutes les pages ou par la perforation de toutes les pages au moyen d'un poinçon d'un diamètre approprié, au moins égal à celui d'un perforateur standard;


At the other end of the drum drill a 50 mm diameter hole 100 mm from the edge in such a way that the orifice is uppermost when the receptacle is laid down and ready for the test (Figure 6.3.2.1.)

À l’autre extrémité du fût, percer un trou de 50 mm de diamètre, à 100 mm du bord, de telle sorte que cet orifice soit le point le plus haut lorsque le récipient est posé à plat et prêt pour l’essai (figure 6.3.2.1).


The diameter of the holes must be 6 to 7 mm (see Section A-B in Figure 1), depending on the diameter of the detonating cord used (4.3.2).

Les trous doivent avoir de 6 à 7 mm de diamètre (voir coupe A-B de la figure 1), en fonction du diamètre du cordeau détonant (4.3.2.) utilisé.


The gas feed tube to the bubbler B ends in a small sphere of 1 cm diameter with 20 0,2-mm diameter holes around its largest horizontal circumference.

Le tube d'amenée des gaz dans le barboteur B est terminé par une petite sphère de 1 cm de diamètre comportant sur son grand cercle horizontal 20 trous de 0,2 mm de diamètre.


When a stepped and holed type indicator is used, the diameter of the smallest visible hole may not exceed 0,25 mm.

Lorsqu'on utilise un indicateur du type à gradins et à trous, le diamètre du plus petit trou visible ne peut dépasser 0,25 mm.




datacenter (1): www.wordscope.fr (v4.0.br)

'Diameter the hole' ->

Date index: 2023-12-17
w