Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Main transverse watertight compartment

Traduction de «Main transverse watertight compartment » (Anglais → Français) :

TERMINOLOGIE
voir aussi les traductions en contexte ci-dessous
main transverse watertight compartment

compartiment principal étanche transversal
TRADUCTIONS EN CONTEXTE
(7) Where in any ship a main transverse watertight compartment contains local subdivision and the Board is satisfied that, after any assumed side damage extending over a length of 0.03L + 3.05 m, or 10.67 m, or 0.1L, whichever is the least, the whole volume of the main compartment will not be flooded, a proportionate allowance may be made in the permissible length otherwise required for such compartment; in such a case the volume of effective buoyancy assumed on the undamaged side shall not be greater than that assumed on the damaged side.

(7) Lorsque sur un navire un compartiment étanche transversal principal est lui-même compartimenté et que le Bureau a la certitude que, dans l’hypothèse d’une avarie s’étendant sur la plus petite des trois longueurs 0,03L + 3,05 m ou 10,67 m ou 0,1L, l’ensemble du compartiment principal ne sera pas envahi, une augmentation proportionnelle de la longueur admissible pourra être accordée par rapport à celle qui sera calculée sans tenir compte du compartimentage supplémentaire. Dans ce cas, le volume de la réserve de flottabilité supposé intact du côté opposé à l’avarie ne sera p ...[+++]


(e) if carrying more than 1 000 passengers, it shall be so subdivided by main transverse watertight bulkheads that with any two adjacent main compartments flooded, the margin line will not be submerged.

e) s’il transporte plus de 1 000 passagers, il sera compartimenté par des cloisons étanches transversales de façon que la ligne de surimmersion ne puisse être immergée si deux compartiments principaux adjacents venaient à être envahis.


(c) that is over 61 m in water line length shall be so subdivided by main transverse watertight bulkheads that with any two adjacent main compartments flooded, the margin line will not be submerged.

c) qui a une longueur de plus de 61 m à la ligne de flottaison sera compartimenté au moyen de cloisons étanches transversales principales de façon que la ligne de surimmersion ne puisse être immergée si deux compartiments principaux adjacents venaient à être envahis.


19 (1) Every fishing vessel shall be fitted with not less than three suitably spaced main transverse watertight bulkheads extending from the keel or horn timber to the weatherdeck, located as follows:

19 (1) Tout bateau de pêche aura au moins trois cloisons étanches principales transversales, convenablement espacées, allant de la quille ou de l’allonge de poupe contre la jaumière jusqu’au pont découvert et situées ainsi :


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
24 (1) Subject to subsection (2), a fishing vessel shall be fitted with two main transverse watertight bulkheads, one located forward of amidships at a distance not exceeding 35 per cent of the length of the vessel and the other located aft of amidships at a distance not exceeding 45 per cent of the length of the vessel, and the construction of the bulkheads shall be in accordance with Schedule III.

24 (1) Sous réserve du paragraphe (2), un bateau de pêche doit avoir au moins deux cloisons transversales principales qui sont étanches et construites conformément à l’annexe III, dont l’une est située à l’avant du bateau à une distance du milieu n’excédant pas 35 pour cent de la longueur du bateau et l’autre, à l’arrière du bateau, à une distance du milieu n’excédant pas 45 pour cent de la longueur du bateau.


If side structural sponsons are fitted to enable compliance with this regulation, and as a consequence there is an increase in the breadth (B) of the ship and hence the vessel's B/5 distance from the ship's side, such modification shall not cause the relocation of any existing structural parts or any existing penetrations of the main transverse watertight bulkheads below the bulkhead deck (see fig 5)

Si des caissons latéraux de stabilité sont installés afin de respecter la présente règle, ce qui a pour effet d'augmenter la largeur (B) du navire et, par conséquent, la distance B/5 par rapport aux côtés du navire, cette modification ne doit pas entraîner le déplacement de parties structurelles existantes ni des passages des principales cloisons transversales étanches à l'eau au-dessous du pont de cloisonnement (cf. fig. 5).




datacenter (1): www.wordscope.fr (v4.0.br)

'Main transverse watertight compartment' ->

Date index: 2023-11-19
w