Traduction de «rigid attachment point » (Anglais → Français) :

attach point [ attachment point ]

solder attachment point | welding point

external payload accommodation [ attached payload site | accommodation site for external payloads | accommodation for external payloads | external attachment point | external payload accommodation site ]

grappler arm attachment point

priority | attachment point

lock attachment point

sapphire rigid point

Stiffness of SFAD: When attached to rigid anchorage bar(s) with the front cross member of the SFAD supported by a rigid bar that is held at the centre by a longitudinal pivot 25 mm below the SFAD base (to allow bending and twisting of the SFAD base) the movement of point X shall not be greater than 2 mm in any direction when forces are applied in accordance with Table 1 of paragraph 6.6.4 of this Regulation.

3.1.3. Equipment shall be provided for measuring the energy absorbed by the protection structure and the rigid parts of the vehicle to which it is attached, for example by measuring the force applied along its vertical direction of application and the corresponding vertical deflection of the beam relative to the horizontal plane passing through the R-point of the driver’s seating position.

1.4.1.1. where a safety-belt includes a rigid part that is attached to a lower anchorage whether this is static or free to pivot, the effective anchorage for all of the seat-adjustment positions is the point where the strap is attached to that rigid part;

Annex V).3.3.A tractor representative of the tractor type for which the protection structure to be approved is intended shall be submitted to the technical service responsible for conducting the component type-approval tests. This tractor shall be fitted with the protection structure.3.4.The holder of EEC component type-approval may request its extension to other tractor types. The competent authority which has granted the original EEC component type-approval shall grant the extension if the approved protection structure and the type(s) of tractor for which the extension is requested comply with the following conditions:the mass of the unballasted tractor, as defined in Item 1.4 of Annex II, does not exceed by more than 5 % the reference ma ...[+++]ss used in the tests,the wheelbase or the moment of inertia in relation to the rear-wheel axle is not more than the reference wheelbase or moment of inertia,the method of attachment and the points of attachment to the tractor are identical,any components, such as mudguards and bonnet which may provide support for the protection structure have indentical strength and are identically situated with respect to the protection structure,the critical dimensions and the position of the seat and steering wheel relative to the protection structure, and the position relative to the protection structure of the points deemed rigid and taken