Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Horizontal screen partitioning
Horizontal screen split
Screen with horizontal edge
Screen with vertical edge

Traduction de «screen with horizontal edge » (Anglais → Français) :

TERMINOLOGIE
voir aussi les traductions en contexte ci-dessous


horizontal screen partitioning | horizontal screen split

division horizontale de l'écran | partage horizontal de l'écran | partition horizontale de l'écran


TRADUCTIONS EN CONTEXTE
To determine the lower, upper and lateral limits of the illuminating surface only screens with horizontal or vertical edges shall be used to verify the distance to the extreme edges of the vehicle and the height above the ground.

pour déterminer les bords inférieurs, supérieurs et latéraux de la plage éclairante, on considère seulement des écrans à bords horizontaux ou verticaux, de façon à vérifier la distance jusqu’aux extrémités du véhicule et la hauteur au-dessus du sol.


(d) the take-off/approach surface abutting the 25R end of the strip surface associated with runway 07L-25R, consisting of an inclined surface having a ratio of 1.000 m measured vertically to 60.000 m measured horizontally, rising to an imaginary line drawn at right angles to the projected centreline of the strip surface and distant 3 000.000 m measured horizontally from the end of the strip surface; thence continuing upward at a ratio of 1.000 m measured vertically to 50.000 m measured horizontally, rising to the outer ...[+++]

d) la surface de décollage/d’approche attenante à l’extrémité 25R de la surface de bande associée à la piste 07L-25R consiste en une surface inclinée à raison de 1,000 m suivant la verticale pour 60,000 m suivant l’horizontale, qui s’élève jusqu’à une ligne imaginaire tracée à angle droit par rapport au prolongement de l’axe de la surface de bande et à une distance suivant l’horizontale de 3 000,000 m à partir de l’extrémité de la surface de bande; de là, elle se prolonge vers le haut à raison de 1,000 m suivant la verticale pour 50, ...[+++]


(e) the take-off/approach surface abutting the 07C end of the strip surface associated with runway 07C-25C, consisting of an inclined surface having a ratio of 1.000 m measured vertically to 60.000 m measured horizontally, rising to an imaginary line drawn at right angles to the projected centreline of the strip surface and distant 3 000.000 m measured horizontally from the end of the strip surface; thence continuing upward at a ratio of 1.000 m measured vertically to 50.000 m measured horizontally, rising to the outer ...[+++]

e) la surface de décollage/d’approche attenante à l’extrémité 07C de la surface de bande associée à la piste 07C-25C consiste en une surface inclinée à raison de 1,000 m suivant la verticale pour 60,000 m suivant l’horizontale, qui s’élève jusqu’à une ligne imaginaire tracée à angle droit par rapport au prolongement de l’axe de la surface de bande et à une distance suivant l’horizontale de 3 000,000 m à partir de l’extrémité de la surface de bande; de là, elle se prolonge vers le haut à raison de 1,000 m suivant la verticale pour 50, ...[+++]


(a) the take-off/approach surface abutting the 07R end of the strip surface associated with runway 07R-25L, consisting of an inclined surface having a ratio of 1.000 m measured vertically to 60.000 m measured horizontally, rising to an imaginary line drawn at right angles to the projected centreline of the strip surface and distant 3 000.000 m measured horizontally from the end of the strip surface; thence continuing upward at a ratio of 1.000 m measured vertically to 50.000 m measured horizontally, rising to the outer ...[+++]

a) la surface de décollage/d’approche attenante à l’extrémité 07R de la surface de bande associée à la piste 07R-25L consiste en une surface inclinée à raison de 1,000 m suivant la verticale pour 60,000 m suivant l’horizontale, qui s’élève jusqu’à une ligne imaginaire tracée à angle droit par rapport au prolongement de l’axe de la surface de bande et à une distance suivant l’horizontale de 3 000,000 m à partir de l’extrémité de la surface de bande; de là, elle se prolonge vers le haut à raison de 1,000 m suivant la verticale pour 50, ...[+++]


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
(c) the take-off/approach surface abutting the 07L end of the strip surface associated with runway 07L-25R, consisting of an inclined surface having a ratio of 1.000 m measured vertically to 60.000 m measured horizontally, rising to an imaginary line drawn at right angles to the projected centreline of the strip surface and distant 3 000.000 m measured horizontally from the end of the strip surface; thence continuing upward at a ratio of 1.000 m measured vertically to 50.000 m measured horizontally, rising to the outer ...[+++]

c) la surface de décollage/d’approche attenante à l’extrémité 07L de la surface de bande associée à la piste 07L-25R consiste en une surface inclinée à raison de 1,000 m suivant la verticale pour 60,000 m suivant l’horizontale, qui s’élève jusqu’à une ligne imaginaire tracée à angle droit par rapport au prolongement de l’axe de la surface de bande et à une distance suivant l’horizontale de 3 000,000 m à partir de l’extrémité de la surface de bande; de là, elle se prolonge vers le haut à raison de 1,000 m suivant la verticale pour 50, ...[+++]


(b) the take-off/approach surface abutting the 25L end of the strip surface associated with runway 07R-25L, consisting of an inclined surface having a ratio of 1.000 m measured vertically to 60.000 m measured horizontally, rising to an imaginary line drawn at right angles to the projected centreline of the strip surface and distant 3 000.000 m measured horizontally from the end of the strip surface; thence continuing upward at a ratio of 1.000 m measured vertically to 50.000 m measured horizontally, rising to the outer ...[+++]

b) la surface de décollage/d’approche attenante à l’extrémité 25L de la surface de bande associée à la piste 07R-25L consiste en une surface inclinée à raison de 1,000 m suivant la verticale pour 60,000 m suivant l’horizontale, qui s’élève jusqu’à une ligne imaginaire tracée à angle droit par rapport au prolongement de l’axe de la surface de bande et à une distance suivant l’horizontale de 3 000,000 m à partir de l’extrémité de la surface de bande; de là, elle se prolonge vers le haut à raison de 1,000 m suivant la verticale pour 50, ...[+++]


The space for mounting the plate must be visible within a space bordered by two dihedrals: one with a horizontal edge defined by two planes passing through the upper and lower horizontal edges of the space for mounting the plate, the angles of which in relation to the horizontal are shown in Figure 1; the other with a perceptibly vertical edge defined by two planes passing through each side of the plate, the angles of which in relation to the median longitudinal plane of ...[+++]

La visibilité de l’emplacement pour le montage de la plaque d’immatriculation doit être assurée à l’intérieur d’un espace délimité par deux dièdres: l’un avec une arête horizontale et défini par deux plans qui passent par les bords horizontaux supérieurs et inférieurs de l’emplacement pour le montage de la plaque et dont les angles par rapport à l’horizontale sont indiqués sur la figure 1, l’autre avec une arête sensiblement verticale et défini par deux plans qui passent par les bords latéraux de la plaque et dont les angles par rapport au plan longitudinal médian du véhicule sont indiqués sur la figure 2.


6.1. The space for mounting the plate must be visible within a space bordered by two dihedrals: one with a horizontal edge defined by two planes passing through the upper and lower horizontal edges of the space for mounting the plate, the angles of which in relation to the horizontal are shown in Figure 1; the other with a perceptibly vertical edge defined by two planes passing through each side of the plate, the angles of which in relation to the median longitudinal plan ...[+++]

6.1. La visibilité de l'emplacement pour le montage de la plaque d'immatriculation doit être assurée à l'intérieur d'un espace délimité par deux dièdres: l'un avec une arête horizontale et défini par deux plans qui passent par les bords horizontaux supérieurs et inférieurs de l'emplacement pour le montage de la plaque et dont les angles par rapport à l'horizontale sont indiqués sur la figure 1, l'autre avec une arête sensiblement verticale et défini par deux plans qui passent par les bords latéraux de la plaque et dont les angles par rapport au plan longitudinal médian sont indiqués sur la figure 2.


To determine the lower, upper and lateral limits of the illuminating surface, only screens with horizontal or vertical edges shall be used.

Pour déterminer les bords inférieur, supérieur et latéraux de la plage éclairante, on considère seulement des écrans à bord horizontal ou vertical.


To determine the lower, upper and lateral limits of the illuminating surface, only screens with horizontal or vertical edges shall be used.

Pour déterminer les bords inférieur, supérieur et latéraux du feu, on considère seulement des écrans à bord horizontal ou vertical.




datacenter (1): www.wordscope.fr (v4.0.br)

'screen with horizontal edge' ->

Date index: 2021-08-09
w