Traduction de «Documentation des fabricants » (Français → Anglais) :

for vessels not manufactured, or manufactured only partly, in accordance with the harmonised standards referred to in Article 12, the manufacturer shall submit for examination a prototype, representative of the production envisaged, of the complete vessel and the technical documentation and supporting evidence for examination and assessment of the adequacy of the technical design of the vessel (Module B – production type).

They shall ensure that the manufacturer has drawn up the technical documentation, that the vessel bears the CE marking and the inscriptions provided for in point 1 of Annex III and is accompanied by the required documents, and that the manufacturer has complied with the requirements set out in Article 6(5) and (6).

They shall ensure that the manufacturer has drawn up the technical documentation, that the electrical equipment bears the CE marking and is accompanied by the required documents, and that the manufacturer has complied with the requirements set out in Article 6(5) and (6).

(Return tabled) Question No. 168 Mr. Frank Valeriote: With regard to the engines (propulsion system) for the 65 F-35 fighter jets purchased by Canada for future use by the Canadian Forces: (a) does the estimated $9 billion acquisition cost for the 65 F-35 fighter jets include the engines for all 65 F-35 fighter jets; (b) if the government’s response to part (a) is yes, for each of the 65 F-35 fighter jets, (i) which engine, including the manufacturer’s name, was used in the calculation of the estimated acquisition price for the 65 F-35 fighter jets, (ii) what is the estimated cost for each engine used for the calculation of the estimate ...[+++]d acquisition price, (iii) has the estimated cost for each engine used for the calculation of the estimated acquisition price increased or decreased since the original calculation and, if so, by how much, (iv) what is the estimated cost for sustainment over a 20-year period for each engine used in the calculation of the estimated acquisition price, (v) how many engine choices or options were made available to the Department of National Defence (DND) for calculating the estimated acquisition price, (vi) what are the names of the engine manufacturers with regard to the government's answer in part (b)(v), (vii) with regard to the government's answer in part (b)(v), when were the engine choices or options made available to DND for calculating the estimated acquisition price; (c) if the government’s response to part (a) is no, for each of the 65 F-35 fighter jets, (i) what is the estimated purchase cost, above the $9 billion acquisition price, for each engine, (ii) what is the estimated cost for sustainment over a 20-year period for each engine; (iii) which engine and manufacturer was used with regard to the government’s answer in parts (c)(i) and (c)(ii); (d) have any engines options or choices been presented to DND or the government for final approval; (e) if the government’s response to part (d) is yes, (i) how many options have be ...

4. Samples of ingredients and of each batch of products placed on the market or of each specific portion of production (in the case of continuous production), or as appropriate records to be kept in a register by the manufacturer for at least two years, must be taken in sufficient quantity using a procedure pre-established by the manufacturer and be retained in order to ensure traceability (on a regular basis in the case of manufacture solely for the manufacturer's own needs).

However, there are continual difficulties, either with the documentation not being available, and hence with their assessments against Canadian manufacturers even in respect of legitimate exports, or the manufacturer, because of the amount of money involved, is forced to come up with documentation that really has been put together after the fact.