Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Machine de formage sous pression
Machine à former dans le vide
Machine à former le métal sous haute énergie
Machine à former sous pression
Machine à former sous vide
Matière à former sous le vide
Ouvrier à la métallisation sous vide
Ouvrière à la métallisation sous vide
Personne ayant des difficultés à se former
Personne défavorisée en matière d'éducation
élaboration au four à électrode consommable sous vide

Traduction de «Matière à former sous le vide » (Français → Anglais) :

TERMINOLOGIE
voir aussi les traductions en contexte ci-dessous
matière à former sous le vide

vacuum-forming material


machine à former sous vide | machine à former dans le vide

vacuum forming machine


ouvrier à la métallisation sous vide [ ouvrière à la métallisation sous vide ]

vacuum-metallizer tender


machine à former sous pression [ machine de formage sous pression ]

pressure forming machine


machine à former le métal sous haute énergie

high energy rate metal forming machine


élaboration au four à électrode consommable sous vide

vacuum arc remelted


ouvrier à la métallisation sous vide

vacuum-metallizer tender


machine à mouler les matières plastiques artificielles par moulage sous vide

machine for moulding artificial plastics by vacuum moulding


personne défavorisée en matière d'éducation (1) | personne ayant des difficultés à se former (2)

person faced with learning challenges
TRADUCTIONS EN CONTEXTE
(2) Un changement aux machines à mouler sous vide et autres machines à thermoformer de la sous-position 8486.40 de la sous-position 8486.90, qu’il y ait ou non également un changement de tout autre produit de la sous-position 8486.40 ou de toute autre position, sauf de la position 84.77 ou des autres machines et appareils à mouler ou à former pour travailler le caoutchouc ou les matières plastiques de la sous-position 8486.40, à la ...[+++]

(2) A change to vacuum moulding machines and other thermoforming machines of subheading 8486.40 from subheading 8486.90, whether or not there is also a change from any other good of subheading 8486.40 or any other heading, except from heading 84.77 or other moulding or otherwise forming machinery for working rubber or plastics of subheading 8486.40, provided there is a regional value content of not less than:


(5) Un changement aux autres machines à mouler ou à former pour travailler le caoutchouc ou les matières plastiques de la sous-position 8486.40 des sous-positions 8477.90 ou 8486.90, qu’il y ait ou non également un changement de tout autre produit de la sous-position 8486.40 ou de toute autre position, sauf des machines à mouler sous vide et des autres machi ...[+++]

(5) A change to other moulding or otherwise forming machinery for working rubber or plastics of subheading 8486.40 from subheading 8477.90 or 8486.90, whether or not there is also a change from any other good of subheading 8486.40 or any other heading, except from vacuum moulding machines and other thermoforming machines of subheading 8486.40 or subheadings 8477.10 through 8477.80, provided there is a regional value content of not less than:


(1) Un changement aux machines à mouler sous vide et autres machines à thermoformer de la sous-position 8486.40 de tout autre produit de la sous-position 8486.40 ou de toute autre position, sauf de la position 84.77 ou des autres machines et appareils à mouler ou à former pour travailler le caoutchouc ou les matières plastiques de la sous-position 8486.40; ou

(1) A change to vacuum moulding machines and other thermoforming machines of subheading 8486.40 from any other good of subheading 8486.40 or any other heading, except from heading 84.77 or other moulding or otherwise forming machinery for working rubber or plastics of subheading 8486.40; or


(4) Un changement aux autres machines à mouler ou à former pour travailler le caoutchouc ou les matières plastiques de la sous-position 8486.40 de tout autre produit de la sous-position 8486.40 ou de toute autre position, sauf des machines à mouler sous vide et des autres machines à thermoformer de la sous-position 8486.40 ou de ...[+++]

(4) A change to other moulding or otherwise forming machinery for working rubber or plastics of subheading 8486.40 from any other good of subheading 8486.40 or any other heading, except from vacuum moulding machines and other thermoforming machines of subheading 8486.40 or heading 84.77; or


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
Contenu de la législation nationale: exemption des prescriptions figurant sous 6.7 et 6.8 de l’ADR pour le transport par route de citernes fixes nominalement vides et non nettoyées (pour leur entreposage dans des lieux fixes) en vue de leur nettoyage, réparation, mise à l’essai ou mise à la ferraille, à condition que a) tous les tuyaux fixés à la citerne qu’il est raisonnablement possible d’enlever aient été enlevés; b) la citerne ait été équipée d’un dispositif de décompression adéquat, qui doit rester opérationnel pendant le transp ...[+++]

Content of the national legislation: Exemption from the requirements of 6.7 and 6.8 of the ADR for the carriage by road of nominally empty uncleaned storage tanks (for storage at fixed premises) for the purpose of cleaning, repair, testing or scrapping, provided that (a) as much of the pipe work which was connected to the tank as was reasonably practicable to remove from it has been removed; (b) a suitable pressure relief valve, which shall remain operational during the carriage, is fitted to the tank; and (c) subject to (b) above all openings in the tank and in any pipe work attached thereto have been sealed to prevent the escape of a ...[+++]


Contenu de la législation nationale: exemption des prescriptions figurant sous 6.7 et 6.8 de l’ADR pour le transport par route de citernes fixes nominalement vides et non nettoyées (pour leur entreposage dans des lieux fixes) en vue de leur nettoyage, réparation, mise à l’essai ou mise à la ferraille, à condition que: a) tous les tuyaux fixés à la citerne qu’il est raisonnablement possible d’enlever aient été enlevés; b) la citerne ait été équipée d’un dispositif de décompression adéquat, qui doit rester opérationnel pendant le trans ...[+++]

Content of the national legislation: Exemption from the requirements of 6.7 and 6.8 of the ADR for the carriage by road of nominally empty uncleaned storage tanks (for storage at fixed premises) for the purpose of cleaning, repair, testing or scrapping, provided that (a) as much of the pipe work which was connected to the tank as was reasonably practicable to remove from it has been removed; (b) a suitable pressure relief valve, which shall remain operational during the carriage, is fitted to the tank; and (c) subject to (b) above all openings in the tank and in any pipe work attached thereto have been sealed to prevent the escape of a ...[+++]


0406 90 06 | EMMENTAL, GRUYÈRE, SBRINZ, BERGKÕSE ET APPENZELL, D’UNE TENEUR EN MATIÈRES GRASSES >= 45 % EN POIDS DE LA MATIÈRE SÈCHE, D’UNE MATURATION >= 3 MOIS, EN MORCEAUX, SANS CROTE, D’UN POIDS NET 499,67 _, CONDITIONNÉS SOUS VIDE OU GAZ INERTE, PORTANT SUR L’EMBALLAGE LA DÉNOMINATION DU FROMAGE, LA TENEUR EN MATIÈRES GRASSES, LE NOM DE L’EMBALLEUR RESPONSABLE ET LE PAYS DE FABRICATION |

0406 90 06 | EMMENTALER, GRUYERE, SBRINZ, BERGKASE AND APPENZELL, OF A FAT CONTENT NOT LESS THAN 45 % BY WEIGHT IN THE DRY MATTER, MATURED FOR THREE MONTHS OR MORE, PIECES WITHOUT RIND, OF A NET WEIGHT OF LESS THAN 450 G |


Contenu de la législation nationale: Exemption des prescriptions figurant sous 6.7 et 6.8 de l’ADR pour le transport par route de citernes fixes nominalement vides et non nettoyées (pour leur entreposage dans des lieux fixes) en vue de leur nettoyage, réparation, mise à l’essai ou mise à la ferraille, à condition que a) tous les tuyaux fixés à la citerne qu’il est raisonnablement possible d’enlever aient été enlevés; b) la citerne ait été équipée d’un dispositif de décompression adéquat, qui doit rester opérationnel pendant le transp ...[+++]

Content of the national legislation: Exemption from the requirements of 6.7 and 6.8 of the ADR for the carriage by road of nominally empty uncleaned storage tanks (for storage at fixed premises) for the purpose of cleaning, repair, testing or scrapping, provided that (a) as much of the pipe work which was connected to the tank as was reasonably practicable to remove from it has been removed; (b) a suitable pressure relief valve, which shall remain operational during the carriage, is fitted to the tank; and (c) subject to (b) above all openings in the tank and in any pipe work attached thereto have been sealed to prevent the escape of a ...[+++]


Contenu de la législation nationale: exemption des prescriptions figurant sous 6.7 et 6.8 de l’ADR pour le transport par route de citernes fixes nominalement vides et non nettoyées (pour leur entreposage dans des lieux fixes) en vue de leur nettoyage, réparation, mise à l’essai ou mise à la ferraille, à condition que: a) tous les tuyaux fixés à la citerne qu’il est raisonnablement possible d’enlever aient été enlevés; b) la citerne ait été équipée d’un dispositif de décompression adéquat, qui doit rester opérationnel pendant le trans ...[+++]

Content of the national legislation: Exemption from the requirements of 6.7 and 6.8 of the ADR for the carriage by road of nominally empty uncleaned storage tanks (for storage at fixed premises) for the purpose of cleaning, repair, testing or scrapping, provided that (a) as much of the pipework which was connected to the tank as was reasonably practicable to remove from it has been removed; (b) a suitable pressure relief valve, which shall remain operational during the carriage, is fitted to the tank; and (c) subject to (b) above all openings in the tank and in any pipework attached thereto have been sealed to prevent the escape of any ...[+++]


2. Décision 92/562/CEE de la Commission relative à l'agrément de systèmes de traitement thermique de remplacement pour la transformation de matière à haut risque; 3. Décision 94/382/CE de la Commission, modifiée en dernier lieu par la décision 95/29/CE de la Commission relative à l'agrément de systèmes de traitement thermique de remplacement pour la transformation des déchets de ruminants au regard de l'inactivation des agents de l'encéphalopathie spongiforme bovine. Cette décision interdit entre autres l'utilisation d'un système d'élimination (la méthode continue sous vide ...[+++] graisse ajoutée) et fixe de nouveaux paramètres de temps/température pour tous les autres systèmes agréés pour la transformation de matières de ruminants conformément à la décision 92/562/CEE; 4. Décision 94/381/CE de la Commission, modifiée en dernier lieu par la décision 95/60/CE relative à l'encéphalopathie spongiforme bovine et à l'alimentation à base de protéines dérivées de mammifères.

2. Commission Decision 92/562/EEC on the approval of alternative heat treatment systems for processing high-risk material; 3. Commission Decision 94/382/EC, as last amended by Commission Decision 95/29/EC ,on the approval of alternative heat treatment systems for processing animal waste of ruminant origin, with a view to the inactivation of spongiform encephalopathy agents.In particular this Decision prohibits the use of one rendering system (the continuous vacuum added fat system) and sets new time/temperature parameters fo ...[+++]




datacenter (12): www.wordscope.fr (v4.0.br)

Matière à former sous le vide ->

Date index: 2022-06-13
w