Traduction de «Technique de Monte-Carlo » (Français → Anglais) :

Given the harmonisation work in progress in the World Forum for Harmonisation of Vehicle Regulations, it is essential to take account of the most recent developments laid down in Resolution R.E. 3 on Classification and definition of power-driven vehicles and trailers in the framework of the Agreement of the UNECE concerning the adoption of uniform prescriptions for wheeled vehicles, equipment and parts which can be fitted to and/or used on wheeled vehicles and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions (Revised 1958 Agreement) as well as the Special Resolution S.R. 1 concerning the common definitions of vehicle categories, masses and dimensions in the framework of the UNECE Agreement c ...[+++]oncerning the establishing of global technical regulations for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles (‘Parallel or 1998 Agreement’).

(2) Directive 86/298/EEC is one of the separate Directives of the EC type-approval system provided for in Council Directive 74/150/EEC, as replaced by Directive 2003/37/EC of the European Parliament and of the Council of 26 May 2003 on type-approval of agricultural or forestry tractors, their trailers and interchangeable towed machinery, together with their systems, components and separate technical units and repealing Directive 74/150/EEC , and lays down technical prescriptions concerning the design and construction of agricultural or forestry tractors as regards the rear-mounted roll-over protection structures.

(2) Directive 87/402/EEC is one of the separate Directives of the EC type-approval system provided for in Council Directive 74/150/EEC, as replaced by Directive 2003/37/EC of the European Parliament and of the Council of 26 May 2003 on type-approval of agricultural or forestry tractors, their trailers and interchangeable towed machinery, together with their systems, components and separate technical units and repealing Directive 74/150/EEC , and lays down technical prescriptions concerning the design and construction of agricultural or forestry tractors as regards the roll-over protection structures mounted in front of the driver's seat.

[23] Agreement concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted to and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions [formerly Agreement concerning the adoption of uniform conditions of approval and reciprocal recognition of approval for motor vehicle equipment and parts, done at Geneva on 20 March 1958] (United Nations Economic Commission for Europe, 5 October 1995); Agreement concerning the establishing of global technical regulations for wheeled vehicles, equipment and parts w ...[+++]hich can be fitted and/or be used on wheeled vehicles, done at Geneva on 25 June 1998).

1.The application for EEC type-approval of a tractor with regard to the strength of a protection structure and the strength of its attachment to the tractor shall be submitted by the tractor manufacturer or by his authorized representative.2.A tractor representative of the tractor type to be approved, on which a protection structure and its attachment, duly approved, are mounted, shall be submitted to the technical services responsible for conducting the type-approval tests.3.The technical service responsible for conducting the type-approval tests shall check whether the approved type of protection structure is intended to be mounted on ...[+++]the type of tractor for which the type-approval is requested.

Whereas certain systems or parts of vehicles which form a separate technical unit are already marketed both separately and after being fitted to a vehicle ; whereas, if it is possible to check such systems or parts before they are fitted to a vehicle, their free movement may be facilitated by the introduction of EEC type-approval also for these separate technical units;