Traduction de «laminage en continu » (Français → Anglais) :

These covered the traditional technological fields (blast furnaces, ladle steelmaking, continuous casting, lamination), as well as environmental actions (an area where the steel industry incurs considerable expense) based on the treatment of liquid and gaseous effluent and anti-noise measures.

Other products of solid section, which have not been further worked than subjected to primary hot-rolling or roughly shaped by forging, including blanks for angles, shapes or sections.

In the cold-rolled strip sector, it was 72% (MPP = 48 million tonnes). MPPs estimated for 1993 in these three product categories are 94.2, 72.3 and 48.4 million tonnes respectively In 1989, a total of 16.1 million tonnes of cold-rolled wide strip was coated, as against 12.3 million tonnes in 1986. Utilization rates were particularly high (electro-galvanizing 79%, hot-dip galvanizing 92%, organic coatings 81%).

It must also agree not to build a second continuous casting facility for slabs for at least five years from the date of closure of the slab mill; (d) ProfilArbed SA agrees by the end of 1995 at the latest, pursuant to the abovementioned Decision, to replace its L-D steel melting shop at Esch-Belval with an electric melting shop with an MPP not exceeding 1 500 kt/year; (e) until output at rolling mill IX at Esch-Belvan begins, Klöckner Stahl agrees to limit production of hot-rolled coil at the Bremen hot strip mill to 2 640 kt/year and not to exceed 3 360 kt/year, including rolling to order; (f) Klöckner Stahl undertakes not to invest, ...[+++] save by prior agreement with the Commission, in maintenance or other plant, in order to maintain the bottleneck identified in the SNV expert report ("Einschleusungslogistik für die Warmbreitbankstrasse der Hütte Bremen, 8.3.1984, Studiengesellschaft Nahverkehr mbH) which limits the quantity of slabs coming from outside for processing to 1 020 kt/year; (g) Klöckner Stahl GmbH cuts its MPP of cold-rolled strip and sheet products by 500 kt/year by reducing MPP at its Bremen plant from 1500 to 1000 kt/year as follows: 300 kt/year before the end of June 1996 200 kt/year before the end of June 1998.

They will mainly involve partial replacement of integrated steel making by electric steelmaking, optimisation of the continuous casting processes and improvements in performance of rolling mills and coating works.

They will mainly consist in the partial replacement of integrated steel making by electric steelmaking, optimisation of the continuous casting process and, finally, improvements in performance of rolling mills and coating works.