Traduction de «Bed surface » (Anglais → Français) :

bed surface [ sliding layer | sliding surface | gliding surface ]

equipment for setting by surface contact with fluid bed | fluid bed thermosetting

bed with four square textile panels | bed with textile panels | bed with four square covers | bed with four square coverings | bed with four loose textile panels | bed with four loose covers | bed with four loose coverings | bed with four hanging textile panels | bed with four hanging covers | bed with four hanging coverings | bed with covers | bed with coverings

sub-surface flow reed bed

fixed-bed milling machine [ fixed-bed miller | fixed-bed mill | bed-type milling machine | bed type milling machine | bed mill | bed-type mill | bed miller | fixed-bed-type milling machine | manufacturing type milling machine ]

fluidized bed incinerator | fluidized-bed incinerator | fluid bed incinerator | fluid-bed incinerator | fluidized bed furnace | fluidized-bed furnace | fluidized bed reactor

rock-bed storage | rock bed storage | pebble bed storage | pebble-bed storage | gravel bed storage | gravel-bed storage

kinds of bedding materials | types of material for bedding | range of pipe-bedding material | types of bedding materials

5. The flame spread time for bedding without a raised fibre surface, or bedding with a raised fibre surface that exhibits ignition or fusion of its base fibres, must be greater than 7 seconds.

If a surface or subsurface Waterbody is wholly enclosed within the boundaries of any Entitlement Lands and has no Discernible Surface Outlet beyond the boundaries of the Entitlement Lands, Saskatchewan shall, without compensation, transfer to Canada all water, beds and shores of that Waterbody, effective upon creation of the Entitlement Reserve with respect to those Entitlement Lands.

(b) in the case of a restraint system other than a car bed, remain in the same adjustment position during the test as it was in immediately before the test began, except that, if the restraint system has a means of automatically repositioning the seating surface to allow the anthropomorphic test device to move from a reclined position to a more upright position and back to a reclined position during the test, the seating surface does not have to remain in the same adjustment position during the test as it was in immediately before the test began;

(Return tabled) Question No. 152 Ms. Kirsty Duncan: With respect to the development of unconventional gas resources, including shale, tight and coal bed methane, and its possible impacts on the environment: (a) what, if any, research has the government undertaken regarding the development of unconventional gas resources, (i) what was the scope of this research in the areas of, but not limited to, air quality, aquatic and terrestrial ecosystem impacts, economic impacts, occupational risks, public safety concerns, and seismic risks, (ii) what, if any, resources did the government provide for this research, (iii) what, if any, process was established to ensure the independence of the researchers, their research, and their findings, (iv) what, ...[+++]if any, case studies were considered as a part of this research, (v) what, if any, scenarios regarding the development of unconventional gas resources were developed as frameworks for the research, (vi) what economic, environmental and social impacts were identified by this research, (vii) what, if any, priority research areas were identified for further study as a result of this research, (viii) what, if any, departments were involved in this research, (ix) what, if any, action was undertaken to ensure inter-departmental cooperation throughout the research process, (x) what, if any, gaps or weaknesses in the regulatory framework did the research identify; (b) what, if any, research has the government undertaken regarding balancing shale gas' potential contribution to energy security with environmental risks; (c) what are the sources of greenhouse gas emissions associated with unconventional gas; (d) has the government developed a process to determine the overall carbon footprint of shale gas throughout the life cycle of natural gas use, if not, why not, and, if so, (i) what federal departments are involved in this process, (ii) how does the government ensure inter-departmental collaboration on this process, (iii) what is the p ...