Traduction de «Particle number » (Anglais → Français) :

The introduction of the Real Driving Emissions test procedure is further tightening the rules since it will check the emissions of NOx and ultrafine particles (Particle Number - PN) from vehicles on the road and will significantly reduce the current discrepancy between emissions measured in real driving and those measured in a laboratory.

(7) In order to achieve EU air quality objectives and to ensure a continuous effort to reduce vehicle emissions, the power to adopt delegated acts in accordance with Article 290 of the Treaty on the Functioning of the European Union (TFUE) should be delegated to the Commission in respect of the detailed rules on the application of Regulation (EC) No 715/2007 to vehicles of categories M1, M2, N1 and N2 with a reference mass exceeding 2 610 kg but with a maximum technically permissible laden mass not exceeding 7 500 kg, the specific procedures, tests and requirements for type approval, the requirements for the implementation of the prohibition on the use of defeat devices that reduce the effectiveness of emission control systems, the measures ...[+++] necessary for the implementation of the obligation of a manufacturer to provide unrestricted and standardised access to vehicle repair and maintenance information, the replacement of the information on the mass of CO2 emissions in the certificate of conformity with information on total mass of CO2 emissions equivalents, the increase or removal of the limit value of total hydrocarbons emissions for positive ignition vehicles, the amendment of Regulation (EC) No 715/2007 for the purposes of recalibrating the particulate mass based limit values and introducing particle number based limit values that would correlate broadly with the petrol and diesel mass limit values, the adoption of a revised measurement procedure for particulates and a particle number limit value, a limit value for emissions of NO2 and limits for tailpipe emissions at cold temperatures for vehicles approved as complying with the Euro 6 emission limits.

(7) In order to achieve Union air quality objectives and to ensure a continuous effort to reduce vehicle emissions, the power to adopt acts in accordance with Article 290 of the Treaty on the Functioning of the European Union (TFUE) should be delegated to the Commission in respect of the detailed rules on the application of Regulation (EC) No 715/2007 to vehicles of categories M1, M2, N1 and N2 with a reference mass exceeding 2 610 kg but with a maximum vehicle mass not exceeding 7 500 kg, the specific procedures, tests and requirements for type approval, the requirements for the implementation of the prohibition on the use of defeat devices that reduce the effectiveness of emission control systems, the measures necessary for the implementa ...[+++]tion of the obligation of a manufacturer to provide unrestricted and standardised access to vehicle repair and maintenance information, including remote diagnostic support, the review of the information on the mass of CO2 emissions in the certificate of conformity with information on total mass of CO2 emissions equivalents, the increase of the limit value of total hydrocarbons emissions for positive ignition vehicles, the amendment of Regulation (EC) No 715/2007 for the purposes of recalibrating the particulate mass based limit values and introducing particle number based limit values that would correlate broadly with the petrol and diesel mass limit values, the adoption of a revised measurement procedure for particulates, including nano-particulates, and a particle number limit value, a limit value for emissions of NO2 and limits for tailpipe emissions at cold temperatures for vehicles approved as complying with the Euro 6 emission limits.

(7) In order to achieve EU air quality objectives and to ensure a continuous effort to reduce vehicle emissions, the power to adopt delegated acts in accordance with Article 290 of the Treaty on the Functioning of the European Union (TFUE) should be delegated to the Commission in respect of the detailed rules on the application of Regulation (EC) No 715/2007 to vehicles of categories M1, M2, N1 and N2 with a reference mass exceeding 2 610 kg but with a maximum vehicle mass not exceeding 5 000 kg, the specific procedures, tests and requirements for type approval, the requirements for the implementation of the prohibition on the use of defeat devices that reduce the effectiveness of emission control systems, the measures necessary for the imp ...[+++]lementation of the obligation of a manufacturer to provide unrestricted and standardised access to vehicle repair and maintenance information, the replacement of the information on the mass of CO2 emissions in the certificate of conformity with information on total mass of CO2 emissions equivalents, the increase or removal of the limit value of total hydrocarbons emissions for positive ignition vehicles, the amendment of Regulation (EC) No 715/2007 for the purposes of recalibrating the particulate mass based limit values and introducing particle number based limit values that would correlate broadly with the petrol and diesel mass limit values, the adoption of a revised measurement procedure for particulates and a particle number limit value, a limit value for emissions of NO2 and limits for tailpipe emissions at cold temperatures for vehicles approved as complying with the Euro 6 emission limits.

(24) In particular, power should be conferred on the Commission to introduce particle number based limit values in Annex I, to specify, if appropriate, the value of the admissible level of NO2 component in the NOx limit value, to establish specific procedures, tests and requirements for type-approval, as well as a measurement procedure for particle number, and to adopt measures concerning off cycle emissions, the use of portable emissions measurement systems, access to vehicle repair and maintenance information and test cycles used to measure emissions.

(24) In particular, power should be conferred on the Commission to introduce particle number based limit values in Annex I, to specify the value of the admissible level of NO2 component in the NOx limit value, to establish specific procedures, tests and requirements for type-approval, as well as a measurement procedure for particle number, and to adopt measures concerning off cycle emissions, access to vehicle repair and maintenance information and test cycles used to measure emissions.