Traduction de «Méthode des chambres et cloisons » (Français → Anglais) :

Method I: the construction in the accommodation spaces and service spaces of a system of internal bulkheading consisting of “B” Class divisions, between main vertical zone bulkheads, together with an automatic fire alarm and fire detection system in these spaces;

(2) The requirements set out in this Part for the use of non-combustible materials in the construction and insulation of the boundary bulkheads of machinery spaces and control stations and for the protection of stairway enclosures and corridors apply in respect of ships in which Method IC, Method IIC or Method IIIC has been adopted.

The competent authorities may allow the requirement against a written exchange‐traded option to be equal to the margin required by the exchange if they are fully satisfied that it provides an accurate measure of the risk associated with the option and that it is at least equal to the capital requirement against an option that would result from a calculation made using the method set out in the remainder of this Annex or applying the internal models method described in Annex V. The competent authorities may also allow the capital requirement for an OTC option cleared by a clearing house recognised by them to be equal to the margin requir ...[+++]ed by the clearing house if they are fully satisfied that it provides an accurate measure of the risk associated with the option and that it is at least equal to the capital requirement for an OTC option that would result from a calculation made using the method set out in the remainder of this Annex or applying the internal models method described in Annex V. In addition they may allow the requirement on a bought exchange‐traded or OTC option to be the same as that for the instrument underlying it, subject to the constraint that the resulting requirement does not exceed the market value of the option. The requirement against a written OTC option shall be set in relation to the instrument underlying it.

The competent authorities may allow the capital requirement for an exchange‐traded future to be equal to the margin required by the exchange if they are fully satisfied that it provides an accurate measure of the risk associated with the future and that it is at least equal to the capital requirement for a future that would result from a calculation made using the method set out in this Annex or applying the internal models method described in Annex V. The competent authorities may also allow the capital requirement for an OTC deriva ...[+++]tives contract of the type referred to in this point cleared by a clearing house recognised by them to be equal to the margin required by the clearing house if they are fully satisfied that it provides an accurate measure of the risk associated with the derivatives contract and that it is at least equal to the capital requirement for the contract in question that would result from a calculation made using the method set out in the this Annex or applying the internal models method described in Annex V.

The competent authorities may also allow the capital requirement for an OTC commodity option cleared by a clearing house recognised by them to be equal to the margin required by the clearing house if they are fully satisfied that it provides an accurate measure of the risk associated with the option and that it is at least equal to the capital requirement for an OTC option that would result from a calculation made using the method set out in the remainder of this Annex or applying the internal models method described in Annex V.

The competent authorities may also allow the capital requirement for an OTC commodity derivatives contract of the type referred to in this point cleared by a clearing house recognised by them to be equal to the margin required by the clearing house if they are fully satisfied that it provides an accurate measure of the risk associated with the derivatives contract and that it is at least equal to the capital requirement for the contract in question that would result from a calculation made using the method set out in the remainder of this Annex or applying the internal models method de ...[+++]scribed in Annex V.