Traduction de «inclinaison du siège » (Français → Anglais) :

The parties' activities overlap in the production of seat structures, length, height and tilt adjusters for car seats as well as in head rests.

where the inclination of the backrest and seat pan is adjustable, these must be adjusted so that the seat index point is in its rear uppermost position;

My bias is predicated on the two hats I wear when I come to this committee: one as a member of the House of Commons who guards the authorities vested in the House jealously, and the other one as a member of the committee who guards the rights and responsibilities of the committee with great jealousy.

2.2. When a H point and a true backrest rake angle is being determined, the seat in question is placed in the rearmost normal position provided by the manufacturer for driving or travelling, the back, if adjustable, being locked in a position specified by the manufacturer or, in the absence of any specification, in a manner such that the real rake angle is between 25° and 15°.

Where the seats in the same row can be regarded as similar (bench seat, identical seats, etc.), only one H point and one true backrest rake angle is determined for each row of seats, the dummy described in section 3 below being seated in a place regarded as representative for the row.

Then the two parts of the backrest board are lightly pressed against the backrest.2.3.2.Seat position and adjustment for determining the location of the seat reference point2.3.2.1.Where the seat position is adjustable, the seat must be adjusted to its rear uppermost position.2.3.2.2.Where the inclination of the backrest and seat pan is adjustable, these must be adjusted so that the reference point is in its rear uppermost position.2.3.2.3.Where the seat is equipped with suspension, the latter must be blocked at mid-travel, unless this is contrary to the instructions clearly laid down by the seat manufacturer.